Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Premium Member
Joined
·
399 Posts
Discussion Starter #1
imported post

hi. happy riding, i removed the front wheel on my bike but i cannot remember if the arrow's on the mounting where the wheel bolt's on if they are supposed to face forward or face toward the back of the bike. i read clymer's owner's manual didn't really say just that there should be a gap at the back of the mount. that's not helping me much, i assume they should face the front but not to sure.
has alway's your input is much appricated.
 

Attachments

·
Guru
Joined
·
3,074 Posts
imported post

If you bring your Wing over to Austrailia, you must reverse them though!!:cheeky1:
 

·
Registered
Joined
·
10,509 Posts
imported post

Make sure you torque the front bolt first. I got in a hurry last summer replacing a leaking fork seal so I could make a rally and didn't torque them properly. After I got home from the 5 day trip I found all 4 nuts loose!! Will never let that happen again!
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top