Steve Saunders Goldwing Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
899 Posts
The air ride system is to maintain ride height front/rear as you load the bike. Theoretically the suspension system should be sufficicent without any air pressure being used but this is not always the case.

To minimize air use, I'd recommend upgrading the front fork springs to 1.1/1.2 kg/mm straight rate fork springs. The rear air shocks can be refurbished and stiffer springs used. The suspension system is some 38 years old and could use a good once over.

Good luck
 
1 - 1 of 1 Posts
Top