Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 5 of 5 Posts

· Registered
Joined
·
434 Posts
Discussion Starter · #1 ·
imported post

OK,Now that the mechanical problems are done,I`ve run into one other small preoblem..pushing the bottom of the radiator out has left me unable to correctly install the lower fairing pieces.Anyone have this problem and what did you do?
 

· Registered
Joined
·
434 Posts
Discussion Starter · #3 ·
imported post

Good idea on the rags.I reread the instructions and he says to remount behind the Radiator instead of in front.I just hate cutting up fairings!!
 

· Registered
Joined
·
434 Posts
Discussion Starter · #5 ·
imported post

Got it..looks good and just took a bit of patience and fortitude.

Did you have to change the lower radiator hose? I`m not liking the way it isnt fully seated because of the pushing out of the lower part of the radiator.
 

· Registered
Joined
·
434 Posts
Discussion Starter · #7 ·
imported post

Thanks again,Hammer..you`ve been a big help..Did you just get one from Autozone in that siaze or did Honda have a bigger one?

BTW,its amazing how easy,in hindsight,this really was to do.About the hardest thing was cutting the timing covers.
 

· Registered
Joined
·
434 Posts
Discussion Starter · #9 ·
imported post

Ya know,I found NAPA to be the best at helping and having with correct parts.I cant count how many times I`ve gotten wrong parts/advice from the more popular stores.
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top