Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
1,077 Posts
Discussion Starter #1
imported post

I need the small washer and oring that goes in the idle mixture scew for just 1 carb (lost it?) I also noticed a small tear in just 1 air cutoff. I would really appreciate it if some kind-hearted soul would be willing to send these used parts. I'd be happy to send a token of my appreciation - just send me an email with an address!

"If you don't ask, you'll never know" - My wife ;)

Thank you all so much - I've learned TONs on this forum!
 

·
Premium Member
Joined
·
9,409 Posts
imported post

brianinmaine, about 2 month ago I was rebuilding the carb off a friends truck and lost one of those little washers, so I went to the auto store down the street (which happenes to be owned by another friend) and asked if he had any opened or damaged rebuild kits and what I needed, he did, and sold me the washer I needed for $0.25...

Its worth a shot to go to the bike shops and check out if they have a spare one:waving:
 

·
Premium Member
Joined
·
2,048 Posts
imported post

Brian, Partsfish shows the idle mixture screw as (screw set A) that includes the screw, o-ring and washer for $16.00. http://www.powersportspro.com/The air cut off valves are available through Sirius http://www.siriusconinc.com/default.aspIf you have one bad it is likely that all four are short for the world unless they have been previously replaced.
 

·
Other side of the pond
Joined
·
3,409 Posts
imported post

That's a good tip DigbyODell, one for the archives. :clapper:
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top