Steve Saunders Goldwing Forums banner
Status
Not open for further replies.

Bent valves (all 8)

4K views 32 replies 18 participants last post by  Coot 
imported post

I've done many a valve job on cars, trucks tractors n such. If the valves are not bent then I hand lap them with a grinding compound. Used to use a suction cup style handle that stuck on the valve, rotate back n forth, lift and rotate, long process. Then I discovered variable speed reversable drills :) I now use that with lapping compound, back and forth, lift and turn, trick is not to go to fast and cause grinding compound to flare. Works very well with practise.
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top