Steve Saunders Goldwing Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
450 Posts
Yep, check that screen. When I rebuilt my break system, rebuilt master cylinder, braded lines, new caliper seals, I used a miti vac to suck out the air in the system. I use this when flushing the clutch and breaks also. You are not the first to do this and will not be the last. Just keep and eye on that fluid level when doing any service!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top