Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
10 Posts
Discussion Starter #1
imported post

I'm trying to install a "Back-off" light module under the seat, but I'm having trouble tracing the brake line through the bike. I want to make sure I intercept the main line under the seat before any previous light additions.

I did install it right after the brake light switch next to the right foot-peg. Before I broke the line I made sure the hand-brake lit my tester in that spot as well as the foot-brake, but I guess I was getting "Back-feed" from the hand brake because after installation only the foot-brake triggered the flashing lights and the hand-brake canceled it out.:whip:

Any ideas/suggestions?

Thanks,
Donald
 

·
Premium Member
Joined
·
10 Posts
Discussion Starter #3
imported post

That's how I wired it originally. Unfortunatly the handbrake cancels out the module since it was between the foot & hand-brake instead of after both in the circuit. I have to hook it up after they splice together. I assume this is somewhere under the seat.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top