Joined
·
202 Posts
imported post
yea even the manual says to "flex" the frame to get to the neutral switch! it was a pain, but i just pried a screwdriver in there to get my little fingers in to the switch. good luck with that! and today i found a thin piece of metal, from a wind shield wiper blade actually. while balancing the carbs i had cut the metal and bent the end so it could reach those little slots to adjust it. hope you can find something to reach down in there!
yea even the manual says to "flex" the frame to get to the neutral switch! it was a pain, but i just pried a screwdriver in there to get my little fingers in to the switch. good luck with that! and today i found a thin piece of metal, from a wind shield wiper blade actually. while balancing the carbs i had cut the metal and bent the end so it could reach those little slots to adjust it. hope you can find something to reach down in there!
