[SHREK snr]

imported post

Hi guys new to this forum, would appreciate any tips /help on how to fit a cb to my 1988 american spec 1500. The hondaline CB like rocking horse doo doos and very expencive this side of pond. Any advice or idears welcome have acouple of old cb units to play with. :15grey: Sorry I did not look in past posts guess i will be cb less.

 

[dellwood33]

imported post

Give Stuart Hall a call to see if he can sort you out. He deals in all things CB - mounting pods included.

Tel: 07817 816298 (Days)

01803 552792 / 07989 955012 evenings / Weekends

 

[wexy]

imported post

Hi Shrek:waving: and welcome to the forum ,,,Yes indeed ,stuart hall is probably your best bet ,,J&M do a handlebar mounted cb ,it is a good unit but works out expensive ,so try Stuart and tell him you got the info here ...cheers Ciaran,:cheeky1:cheers Ciaran

 

[SHREK snr]

imported post

Many thanks for replies guess ill have to save my pennies and contact Stuart Hall was hopping there might have been some idiots guide to fitting aCB sort of DIY DESTROY IT YOURSELF.

 

[07Silver]

imported post

I got Stuarts e-mail off the wingnut a while back. Here it is; [email protected]and if you tell him that you got the info off Steve Saunders site he tends to be more helpful as well.

 

[Phil]

imported post

I brought the J&M system for mine and while it was pricey it was worth thte money - worked straight out the box and no problems at all.

rgds

Phil

 

[englishted]

imported post

In real terms the JM setup is cheaper tha Stuarts deal, and you are getting a radio in the JM too (even though you will use the Honda radio on your Wing instead), and there is less messing about with interfaces with the JM kit.

 

[JDuggan]

imported post

Didn't Mick Chadwck rom Aspencade Specialists do an interface one time. Wasn't too dear either if I recall rightly.

 

[dellwood33]

imported post

What is involved with connecting the JM unit to an 1800 Gold wing ?

Is it simply a plug & play unit or does it involve some creative wiring ?

 

[Phil]

imported post

dont know about fitting the 1800 CB (cant find one on the J & M site) but to fit the one for the 1500 wasnt that big a job. came with all the fittings and a full wiring diagram - i dont know anything about electrics but i wired it in myself and it worked first time - still amazed today LOL

rgds

Phil