Steve Saunders Goldwing Forums banner
1 - 2 of 2 Posts

·
Premium Member
2012 GL1800
Joined
·
791 Posts
You have to measure the AC voltage, Sounds like what you read or heard was a DC measurement. Not the proper way.
Also the wires have to be disconnected for the measurement. It does not matter which wire goes where when you put it back together. Just be VERY careful not to short any wires together while testing. 50-70 volt AC.
and double up the heat shrink on each wire.
 
1 - 2 of 2 Posts
Top