Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
725 Posts
Discussion Starter #1
imported post

i have read several posts about cleaning the remote radio/cb switches. do you disassemble the housing or just spray between the sides of the switch?
 

·
Premium Member
Joined
·
74 Posts
imported post

It is better to take them apart and clean them real good. Clean the contacts carefully with emery cloth then some dilectric grease and put back together.



Watch out for the little ball brg and spring.
 

·
Premium Member
Joined
·
2,824 Posts
imported post

If you use a commercial military grade of contact cleaner no dis-assembly is required. Spray lightly but spray a few times, let the liquid flow off and let the cleaner evaporate normally or use compressed air or cool spray to dissipate any materials.

If you must use dielectrics use very carefully . In the wrong hands will cause more problems than it solves.
 

·
Premium Member
Joined
·
2,102 Posts
imported post

http://goldwingfacts.com/forums/forum1/71560.html

hope the link works, pics kinda suck but you'll get idea. i tried just shooting cleaner in and it didn't work for me. good luck:action::waving:

nope it don't work maybe a mod can help me out? thanks


Fixed it Marty.
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top