Joined
·
3,358 Posts
imported post
There are a ton of posts about this problem. To put it briefly, the bearings in the starter ends wear out and when the motor is hot and the armature coils swell, the play in the bearings allows the armature to short out on the motor casing. When it cools down the bike starts fine. Also the soldered brush cables can burn from bad contact and need to be soldered again.
There are a ton of posts about this problem. To put it briefly, the bearings in the starter ends wear out and when the motor is hot and the armature coils swell, the play in the bearings allows the armature to short out on the motor casing. When it cools down the bike starts fine. Also the soldered brush cables can burn from bad contact and need to be soldered again.
