Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 15 of 15 Posts

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #1 ·
imported post

no power at cdi plug black and white wire. power at fuse, no cruise light, schematic quite confusing, have manual, new p/g, how and where does harness run/ connections? anybody seen this? running great prior to this, i was troubleshooting noise in rear running while on center stand and wham died, no movement on bike, have power cranks great.:?:?:?:?:? HELP thanks marty
 

·
Premium Member
Joined
·
1,304 Posts
imported post

You didn't hit the kill switch accidentally?
 

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #3 ·
imported post

i wish. never use it checked it wiggled and jiggled it before and during cranking
 

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #4 ·
imported post

bump i need help supposed to go tx-sd in two weeks thanks
 

·
Valkyrie Scum
Joined
·
2,777 Posts
imported post

So Marty if I'm understanding correctly you are finding that there is no power at the cdi (think they are also called ignition modules)?
And you have replaced the pulse generators? - Is that correct?
 

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #6 ·
imported post

yes, power at fuse relay seems to be working but haven't taken out and verified continuity yet, pissed off working on rear now, destress , hoping for help, thanks
 

·
Valkyrie Scum
Joined
·
2,777 Posts
imported post

Have you checked to see if you are getting spark at the plugs? I understand a bad fuel pump switch/relay can have the same symptoms.

I'm waiting for a phone call - once it's done I'll give you a call.
 

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #8 ·
imported post

no spark at all not even weak:(
 

·
Premium Member
Joined
·
9,790 Posts
imported post

plainmech wrote:
no spark at all not even weak:(
If you determine it is a relay. get me a picture and number of it and I'll see if I have one that will work for you. I got 3 sets of harnesses and relays for the 1200's from 84-86. maybe something will work for you. PM is best means of contact.

Ride Safe, Ray:waving:
 

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #10 ·
imported post

thank you very much i'll let you know
 

·
Valkyrie Scum
Joined
·
2,777 Posts
imported post

Does anyone know if there is any way to test the CDI on a 1200?
 

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #12 ·
imported post

ok through help from tricky power comes through kill switch, jumpered 12v. to black and white wire and vroooom checking kill switch in am. thanks all for your contribution.:waving::action:
 

·
Valkyrie Scum
Joined
·
2,777 Posts
imported post

WhhhhhoooooHwoooooooooo!!!!!!!
Back in the saddle again!
 

·
Premium Member
Joined
·
2,102 Posts
Discussion Starter · #15 ·
imported post

opened switch ass. sprayed w/ contact cleaner and vroooooom. thanks to all for help, if i can help please feel free to pm me. gotta put my baby back together.:action::action::action::action::action::action::action::action::action::action::action::waving::waving::waving::waving::waving::waving::waving:
 
1 - 15 of 15 Posts
Status
Not open for further replies.
Top