Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
94 Posts
Discussion Starter #1
imported post

I have a Cycle Sound system on my Wing. one of the speakers goes out once in a while.
I removed the system but I can't figure out how to open the darn thing if my life depended on it.
I removed 2 screws on the side. I can partially open the back side but there is something holding in the front.
I imagine there are screws but I can find any, maybe behind the speaker cover but I'm afraid of forcing it.
Also, there is a little with a circuit board inside in line with the power leads. Is this noise suppressor?

Ideas anyone?
Thanks
Kiko
 

Attachments

·
Premium Member
Joined
·
53 Posts
imported post

There are screwsbehind the speakers grillsbut also on the one I had you had to loosen the radio knobs to get it to come apart.
 

·
Premium Member
Joined
·
993 Posts
imported post

maybe behind the speaker cover but I'm afraid of forcing it.


There are screws behind speaker covers holding the 2 halves together...

See if the screens pop off, hiding screws for plastic covers...
 

·
Premium Member
Joined
·
94 Posts
Discussion Starter #4
imported post

I was afraid of forcing the screen out but I did it anyway. It was stuck but it came out.
That did it and I found out the problem is internal, not the speaker or the wiring.
If I can't fix it I'll just buy a new head unit. This one is old and a new one is not that expensive.

Thanks for the help.
Kiko
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top