Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter · #1 ·
I am troubleshooting why I can't hear CB input but can transmit from my headset. When I bought the 2000SE in Dec '12, it had the same cb antenna as the am/fm radio antenna. There was no black plastic in middle of cb antenna. Could this style be correct for 2000? The am/fm ant looks exactly like the CB ant.. Do I have the wrong cb ant? Does anyone else have exact matching antennas? thx Again,,,the problem is that I can barely hear the squelch or incoming signal.
 

·
Premium Member
Joined
·
2,048 Posts
Rick, a picture is worth a thousand words but by your description, you have two AM/FM antennas on your bike, if you have the steel antenna, you must have the load somewhere, top, bottom or center. Strange you cannot hear on your CB as the antenna you have would be fine for receiving but when transmitting, the SWR would be off the chart.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top