Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
45 Posts
Discussion Starter · #1 ·
imported post

I need some Goldwing wisdom. I have an engine available to me that is from an 1981 Interstate. If I put it in my 82 Aspencade will I have to also transfer some parts off my old engine? As in is the electrical output the same? What about theCarbs?


Please let me know on these parts, and if there is some thing else that I should be aware of.



Thanks



LLF

P.S If anyone knows where to get a repair manual for

my 82 Aspencade let me know.
 

·
Premium Member
Joined
·
5,406 Posts
imported post

I would guess that the block is the same but suspect the Aspy goodies need Aspy feeds for the info. A bump so a more knowledgeable member can reply.
 

·
Premium Member
Joined
·
494 Posts
imported post

As for the engine transfer I believe that there is no much difference and that it would work goodwith any 1100 carbs (thoughit could slightlyaffect the performanceif the carbs are not exactly proper ones for that year) and it shouldn'tbe a big problem toreplace another engine to a GL as long as the displacement is the same (1100 in your case). But the other chaps will tell better.

Good luck!


P.S. Nobbie already posted while I was typing. :waving:
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top