Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
8,524 Posts
Discussion Starter #1
imported post

OK, so my fork cover is chrome, and has the two bolts that are in the top. But there is a cap on them as with a mirror there is no heads showing. How do you remove the caps? They are about 1/4" down from the top in the recessed area.:baffled:
 

·
Premium Member
Joined
·
2,169 Posts
imported post

Gently prise them out with a small electrical/watchmakers screwdriver. They are just push-in caps that sit into the screw head.

Phil.
 

·
Premium Member
Joined
·
8,524 Posts
Discussion Starter #3
imported post

Thanks Phil, had a feeling that was it as is on other locations on the bike, but until I knew for sure didn't want to just blindly start digging (gently). My big fingers are going to get a workout in there. Even with a small tool.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top