Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
10,509 Posts
imported post

 

·
Registered
Joined
·
10,509 Posts
imported post

You can also measure down from the top lip of the tubes if the caps are off, 5.5 inches from the top is what Progressive recommends with their springs or the stock springs in the tubes.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Status
Not open for further replies.
Top