Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 6 of 6 Posts

·
Premium Member
Joined
·
2,614 Posts
Discussion Starter #1
imported post

Does anyone have an extra spacer to the front axle assembly (on the throttle side), for an 1100?
 

·
Premium Member
Joined
·
9,790 Posts
imported post

Richardrwg wrote:
Does anyone have an extra spacer to the front axle assembly (on the throttle side), for an 1100?
got a part number#

I just might :baffled:

Ride Safe, Ray

:action:
 

·
Premium Member
Joined
·
2,614 Posts
Discussion Starter #3
imported post

No I don't, how would I get one for you?
 

·
Village Whack Job...
Joined
·
7,908 Posts
imported post


44311-425-870

Aboveis the part number for the spacer/collar that goes directly on the front axel to the right/throttle side of the bike.

Below is the part numebr for the spacer that goes betweent he brake disc and the wheel on the same side.

45128-MB9-870

Below is the part number for the dampening shim that goes between the brake disc and the wheel on the left/clutch side.

45128-445-630

Below is the part number for the spacer/collar that goes directly on the front axel on the left/clutch side.

44620-410-000



Hope this helps.
 

·
Premium Member
Joined
·
2,614 Posts
Discussion Starter #5
imported post

Rayandtracy, going by brokewingers GREATLY appreciated research, the part number is 44311-425-870. THis is the spacer that sits in the fork assembly.

Broke Winger, again, thank you.
 

·
Premium Member
Joined
·
9,790 Posts
imported post

I have a spacer from the 1200I best I can tell they are the same.

Send me your info and I'll drop it in the mail to you.

Ride Safe, Ray

:waving:

And a big thanks to Broke:bowing:
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top