Joined
·
599 Posts
imported post
I swapped a blade fuse holder rated 30 amps on a KZ1000 and found it getting hot and showing signs of burning where the wire was crimped to the connector. Since it's covered with rubber you can't see the crimp. Mine was discoloring the rubber. They didn't look foreign made either. I ended up buying heavy angle blade connectors and soldering.
When I bought both `Wings I didn't mess with the auto store pre-made fuse holders. I hope others have better luck.
From the other thread... http://www.goldwingfacts.com/forums/view_topic.php?id=70117&forum_id=1&highlight=fuse+holder
I swapped a blade fuse holder rated 30 amps on a KZ1000 and found it getting hot and showing signs of burning where the wire was crimped to the connector. Since it's covered with rubber you can't see the crimp. Mine was discoloring the rubber. They didn't look foreign made either. I ended up buying heavy angle blade connectors and soldering.
When I bought both `Wings I didn't mess with the auto store pre-made fuse holders. I hope others have better luck.
From the other thread... http://www.goldwingfacts.com/forums/view_topic.php?id=70117&forum_id=1&highlight=fuse+holder
