[Harry]

imported post

I had some trouble with my 81 gl 1100 having no powerand at first thought it was carb trouble. I found that the coil for number 1 and 2 cyclinder is not working . The other coil is fine . Can you replace one coil or do you have to replace both ??

 

[Harry]

imported post

#1 is on the front of one head and #2 on the front of other , but both run off the same coil. Tried changing the wires that feed the other coil to this one and coil fires so it is not the coil. Going to check wires etc later.

 

[Harry]

imported post

Spark cdi or ignitor for 1 and 2 is gone. Back of both have melted and they are hard to find so far.


Found one and the guy I am getting it from tells me that the caps on the end of the sparkplug wire have resistors in them . If they are bad it causes the cdi or ignitor to heat causing failer.

 

[Harry]

imported post

If they have MPS 200 on them I would love to have them and you just became my best friend. How much postage would it be to Summerside Prince Edward Island Canada so I make sure its enough.Also can you give me a address to send to. My e-mail [email protected]