Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
28 Posts
Discussion Starter #1
imported post

pulled the heads and now ii need to find the best gasket set. any ideas what to get. have read on here bout some not so good to use.
 

·
Premium Member
Joined
·
275 Posts
imported post

Use OEM Honda head gaskets. The other parts involved (O-rings and stuff) can be aftermarket but aftermarket head gaskets seem to have a higher failure rate. Use a straight edge to check the "flatness" of the heads. When torquing the head bolts make sure to do it the way the manual describes (moly grease on the threads and under the heads).
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top