Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
910 Posts
Discussion Starter · #1 ·
imported post

My Clock will not come out after I turn the Key. the key works fine and the clock seems free but it will not come out of it's nest... I have pulled the clock and it seems to be held in by some unknown force. I don't want to force the clock and break some thing,,, any suggestions???
 

·
Vendor
Joined
·
680 Posts
imported post

Turning the key only releases the radio not the clock. There is a spring clip on the back of the clockheld by an 8mm nut, If memory serves me right,

.
 

·
Administrator
1987 GL1200 Interstate
Joined
·
23,274 Posts
imported post

Wayne is right. There's a nut holding the clock in.

You should be able to get to it from the radio opening. If not the windshield and speakers will probably have to be removed to get the guage housing loose.
 

·
Premium Member
Joined
·
910 Posts
Discussion Starter · #4 ·
imported post

Thanks fellas my hole purpose was to take out the radio. I purchesed another radio and fixed the cosmetic problems and wanted to test it before I left feedback on the purcheses... :waving::waving::waving:













 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top