[TXBob]

Evening all!

PO gave me tool kit with my 1500.

It's missing a few tools.

Anyone know where I can get loose tools to fit in it?

Will post pic so you can see what I need.

Thx!
TXBob

 

[ALEX BERECZKY]

You'd be better off making your own kit, than to use the stock one.

 

[Redeye1620]

http://www.ebay.com/sch/i.html?_odk...3.m570.l1313&_nkw=goldwing++tool+kit&_sacat=0

E-bay is a good place to start. You might contact Pinwall Cycle thru e-bay & see if they have what you need laying around loose....-Rich

 

[Pwhoever]

Most of the individual tools should still be available but can get pretty expensive replacing. Take a look HERE for an example. The ebay route would probably be a lot more economical if you want to stick witha stock tool kit...

 

[Rudy]

29, 30 and 31 is all I ever used from mine. Pretty useless otherwise unless you just want the whole collection to be right. Correction, I also used 12 as well for spark plugs.

 

[TXBob]

Thanks PWHOEVER!

I only need 2-3 bits to make whole set. Looks like it will cost about $15 to complete my set.

Thx! TXBob