Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Registered
Joined
·
819 Posts
imported post

I was having pretty much the same issue on my 75. I had the carbs off at least 5 times trying to fix it. Then I was reading on Randakk's site this article : http://www.randakks.com/TechTip7.htm

What it basically says is change your timing slightly to compensate for cam wobble and to set your points to the maximum opening, The books says 0.012" - 0.016 most people split the difference and set it for 0.014, this article says set them for 0.016.

I tried this and suddenly no more idle issues. :clapper:

Hope this helps.

Peter
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top