Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 6 of 6 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hi I have a 76 GL 1000 and would like to rewire only the charging system . So basically battery resistor and stator. My question is what wires go with what wires when there are 3 wires from stator to the regulator then to the battery just a little confused on
 

·
Premium Member
Joined
·
868 Posts
If I understand your question, then it doesn't matter which yellow wires go from the stator to the battery, or which one goes to the regulator.
 

·
Premium Member
Joined
·
1,232 Posts
The three phase wires from the stator ( yellow wires originally) can go to any of the stator inputs on the rectifier/ regulator.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #4 ·
So all three wires from the stator get connected to the regulator then any two can go to the battery terminal ?
 

·
Premium Member
Joined
·
2,163 Posts

This is about as simple as I can make it.
Notice that the rectifier and the regulator are different components.
 
1 - 6 of 6 Posts
Status
Not open for further replies.
Top