Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Premium Member
Joined
·
382 Posts
imported post

Hi Orbit,

I had a problem with my '82 fan not coming on. I took it apart and found that the problem was not in the switch but rather the plastic connector going to the switch. I took off the factory connectors and used some crimp on female spades and it has worked great since (about 3 years now). I did have to extend the wiring just a little bit. I think they made the wiring too short to begin with and it was putting it in a bind. Just thought I would mention that.If you are sure the problem is in the switch thentake out the switch from your bike and bring it to the auto store with you. That wayyou can compair threads. If theyare the same then it should work no problem, hot water is hot water. Good luck
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top