Steve Saunders Goldwing Forums banner

GL1100 generic 3 prong turn signal flasherdoesn't flash!

865 views 2 replies 2 participants last post by  hitecluddite 
#1 · (Edited)
I just bought the bike and the OEM Flasher was bad, I eBayed a 3 prong generic replacement and all the lights come on at the proper time but no flash. I checked the bulbs they are the correct 23W 1156/1157 combo. I have .2ohm between the green wire and gnd. I thought I might have damaged the flasher while figuring out the wiring so I went to my local aftermarket shop and they gave me a two prong which failed after one day because it was only a 11Watt unit. So I ebayed another 3 prong and it does the same thing, blinkers come on but don't flash, even with a battery charger on the battery and 13.9VDC at the flasher. I guess I can find a two prong of the proper wattage, would that be 46W? but does anybody have an idea why this flasher doesn't work? it's a EMGO 66-86782
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top