Steve Saunders Goldwing Forums banner

GL1100 Starter Dismantling

477 Views 3 Replies 2 Participants Last post by  Mr Magic Fingers
imported post

Removed the circlip but the shaft will not drop through.....I am afraid to pound on this and cause damage, why would it be tight ?
Status
Not open for further replies.
1 - 4 of 4 Posts
imported post

Hi Frankenpack,



It will come out. I had to wiggle it back a forth (what microscopic movement is there) and tap it lightly with a small hammer and I really mean "tap'.

You might want to try some penetrating oil too.



Tim.
See less See more
imported post

Tim.....Mr Magic Fingers Looks like I will be needing a new brush cover plate. Will I have to buy a kit or can you get this part seperate.
imported post

Just order the kit. You will need to order the new brushes if they are below the minimum level as well.



Tim.
1 - 4 of 4 Posts
Status
Not open for further replies.
Top