Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
805 Posts
imported post

Boy...quite a few Carb issues here lately.

1) Been too long since I've seen the inside of an 1100 plenum.

2) Did you clean out the tank and change the fuel filter

3) Seems a little far with the pilots, nothing left on the seats before reassembly.

4) Did you clean the tank, change the fuel filter, replace the fuel lines and flush from the tank to the carbs.

Most carb jobs done on bikes that have sat for a while are redone shortly because of foreign material making it's way into the float seats.

If the carbs were gummed up severely I hope you soaked them at least overnight and used compressed air to make sure all passages were open before reassembling.

Looks like you'll be pulling the carbs one more time.
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top