Steve Saunders Goldwing Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter #1
Hi Everyone.

I have an 84 GL1200A. PO had highway pegs when I bought the bike and I mounted them to the crash bars. Unfortunately, the pegs clamp diameter is larger than the crash bar. My pegs have an OD of 1" and my bars have an OD of 7/8". Everywhere I look, I only find 1' and 1-1/4" OD clamps. What do all of the other GL1200's have for their crash bar OD? My crash bars seem to be factory but I'm not absolutely confident that it is. I am currently using the clamps with sandpaper to take up the gap but the clamps still don't fit snug enough to keep from sliding on the crash bars when placing my feet on them. I would be open to buying new pegs if I could find a 7/8" diameter.

Thank you for your help and suggestions.

Richard
 

·
Administrator
Joined
·
26,528 Posts
I thought they were all 1" but maybe not. Try wrapping them with some inner tube rubber.
 
1 - 3 of 3 Posts
Top