Steve Saunders Goldwing Forums banner
Not open for further replies.
1 - 2 of 5 Posts

· Premium Member
3,375 Posts
The picture is actually the CB install but it does show the headset junction box too

Remove the left pocket, on the inner wall at the bottom there is a removable grommet where the antenna cable comes in.

On the picture the coupler holder is actually the fairing where the cables route.

B is the passenger, you will need an extension for that too reach the passenger, may have that.

C is the antenna

A is the driver cable. There is a special grommet that comes with the kit that replaces the solid grommet, I don't bother using the grommet, I just route mine over the front of the plastic cover.

You can get Holders for the cables from also so they don't flop around item 85


1 - 2 of 5 Posts
Not open for further replies.