Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
1,800 Posts
Common mistake people make regarding the connection. You have to ondo the tye wraps on the wiring harness and then there is plenty of slack for the connector to reach the bottom of the tube.
Yep, that is correct... Just did a friends and once you loosen the cable ties at the center of the bike, there is plenty of slack to get to the connector to remove the harness...

Les
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top