[rottiman]

Trying to figure out where to set the air pressure in my rear suspension. Bike is a canadian version which reads in Kpa/cm2. This here good old boy is used to PSI and I don't have any idea where I should be setting it.:wtf:

 

[rottiman]

Here is the converter but you could just google
1 kilopascal (kPa) = 0.1450377377 pounds-force per square inch (psi or lbf/in²)
I normally use a rough conversion of 100kpa equals 14psi

Now i am really confused. When I hit the inflate buttom it begins @ 0 and proceeds to indicate upward to as high as 6 (as far as I ever took it). Haven't a clue as to where I should be setting it.

 

[rottiman]

I am assuming that 6 is 600 kpa and that you would be then at 84 psi rough reckoning.

Any thoughts as to what pressures I should be running, i.e 1 up as opposed to 2 up. I am a new Gold Wing owner and never had the luxury of air adjustable suspension on my prior rides. Thanks for your help, it is muchly appreciated.

 

[rottiman]

Thanks all for your help. Appreciate the info, at least now I know what I'm looking at. Ride Safe