Joined
·
104 Posts
imported post
I made my own from a 2 part epoxy putty. The hardest part is to make sure you get the tab in the right place,. Once it hardened up it was stronger than the original. I used a dremel tool to shape it a little after it was hard. If you use your imagination you can do anything. Hope this helps. Jim
I made my own from a 2 part epoxy putty. The hardest part is to make sure you get the tab in the right place,. Once it hardened up it was stronger than the original. I used a dremel tool to shape it a little after it was hard. If you use your imagination you can do anything. Hope this helps. Jim
