[steve b]

imported post

hi , problems with the mute on the stereo, it is stook on with the display on the LCD indicating MUTE.

have disconnected wire from mute switch to see if it made any differents "NO"

stereo still works fully but the volume is only at about 50%.

any ideas

steve b

 

[steve b]

imported post

hi, the mute button is totally free and is not sticking, i disconected the wire from the switch to see if it made any difference but it didnt.

the mute stayed on!!

is there anything else which could make the mute stay on??

regards steve

 

[steve b]

imported post

hi, there is no CB fitted to my bike, does the mute work on the principle of switching a ground or negative ???

could there be a short or is it possible to diconect the mute fercility totally??

regards steve

 

[steve b]

imported post

can you confirm the mute wire colours at the main radio plug then i will cutit.

if it then stays on mute i must be looking at the radio.

then i will try my radio on another wing.

regards steve

 

[steve b]

imported post

is that terminal 19, so if i connect the wire in terminal 19 to earth then the mute should go off "is that what you say!?

the radio seems ok as i have connected a second radio to the bike and it does the same "mute stays on"

i have also checked the continuity of the mute switch and it does open and close ok.

should i leave the radio fully connected when i try it?

 

[steve b]

imported post

hi my bike is a 1989 canadian spec (no cb)

yes it has the 18 connectorplug and the 6 plug as well

if pin 6 on the eighteen connector plug is the mute is it a ground cable?

 

[steve b]

imported post

switch wire know re-wired from mute switch to radio term 6 and yes the radio sounds great all working thanxs for all your help cheer steve b