Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

· Premium Member
Joined
·
400 Posts
Discussion Starter · #1 ·
I was pricing Passenger Volume Controls and the least expensive one I found was 62.00. I'm no cheap skate but 62.00 to 109.00 for these things are robbery. So I did the next best thing, I built my own. It doesn't have the PTT or the Mic mute LED because I figured my wife knows when she pushes PTT button and if I mute her mic I'll hear about it with a slap on the helmet.

Ok, here's what I spent:

1 ea 25K audio taper pot 3.99 Radio Shack
1 ea Momentary switch 1.99 Radio Shack
1 ea Small construction box 3.99 Radio Shack

I had all the wiring I'll need and the unit volume control will interface into the mic bias circuit I built earlier, which is in series with the passengers 5 pin DIN pigtail and the audio connector under the seat. This unit will mount on the right passengers hand rail with velcro straps. The unit has been waterproofed.

Here's a couple of pictures of the finished unit.

[/IMG]

[/IMG]
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top