Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
89 Posts
Discussion Starter · #1 ·
imported post

Just had to remove the down pipes on a 2001 1800A1 as the pipes at the rear were rotten all 12 of the exhaust studs sheared off, I have removed the remaining portions just to let people know it might be worth checking them for corrosion and greasing them with copper grease or equivilent.
Spav
 

·
Other side of the pond
Joined
·
3,409 Posts
imported post

Thanks Spav. When they break of, do tehy leave a stumped piece for getting at like on the older Wings, or do they break off flush with the holes?
 

·
Premium Member
Joined
·
89 Posts
Discussion Starter · #3 ·
imported post

Yes they leave a stump. I was able to remove them with a good set of mole grips, you dont know any body with a 2007 model as I am after picture of the wiring diagram for the O2 sensors as the 2007 is different o my 2001.
regards Spav
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top