Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Premium Member
Joined
·
2 Posts
Discussion Starter #1
imported post

We have a 2008 GOLDWING 1800 TRIKE and the headlight is too low and I need to find out how to get to the headlight adjustment mechanism. What would be the easiest way and what do I need to take off to get to the mechanism? :stumped: HELP PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!



Does anyone know how I can do this or know of a website to get help on adjusting the headlight? Thank you for any and all assistance........



Alan (Wildman) Bailey
 

·
Premium Member
Joined
·
164 Posts
imported post

It's an easy job Alan. Kneel down at the forks, look up under the fairing and back of headlights. You will see the adjuster unit on each light and each one has an adjuster bolt. 10mm I think, I use an extension on a ratchet to reach up.
With the headlight shining against a wall from about 8' distance, adjust each headlight until the beam is where you want it to be.
 

·
Gregarious Greeter
Joined
·
16,809 Posts
imported post

[align=center]

[/align]
[align=center]Welcome Wildman007[/align]
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top