Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Premium Member
Joined
·
1 Posts
Discussion Starter · #1 ·
imported post

My mic was not working on one headset. After replacing the lower coil cord realized it was in the headset itself and found the mic wire disconnected from the mini 5-din connector on the helmet. It was too small to re solder and so I tried to take the thing apart to resolder. Got it apart but it isn't created to do so and damaged it.

So I though I would try cutting the end off it and the coil connector (older one) to keep from having to buy another head set.

The head set has 3 sets of wires, 2 black and 2 white each. 2 for the mic, and two each for each headphone.The lower cord has 7 or more of different colors.



Can I solder them without interference?

Which wires go to which colors.



Wanting to fix it before Saturday as I'm going on a ride with the wife and would like to talk with her.



Thanks
 

·
Gregarious Greeter
Joined
·
16,809 Posts
imported post

[align=center]

[/align]
[align=center]Welcome:waving:davidfmac[/align]
[align=center]Friendly bump[/align]
[align=center]We do have some good[/align]
[align=center]electronics members here.[/align]
[align=center]Hopefully you will get[/align]
[align=center]you answer soon[/align]
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top