Steve Saunders Goldwing Forums banner

GRRRR ... tooooo much air in front forks .. GL1200i

484 Views 7 Replies 5 Participants Last post by  gah-99
imported post

It's one thing to be an idiot, quite another to speak up and prove it. but....

I misread the label about fork pressure and put 30psi in the front forks. Just to stiffen them up a bit.. you know?? Well, they were stiff.. for awhile, now they have no air and very little oil apparently.. running thru the gears is like riding a bronco...

I put 3 psi in tonight.. smooth ride home, dont know if it will stay. I'm open to suggestions for repair path.. Thanks in advance

:doh:
Status
Not open for further replies.
1 - 2 of 8 Posts
imported post

Are the seals leaking now?
imported post

I don't think your seals are leaking then. Pop off the dust covers and clean everything up. Then watch them for a couple of days. If they are leaking, oil will start running down the fork tubes within about three hundred miles.

On the other hand, if you need 3 lbs. of air in the shocks, you're springs may be sacked.
1 - 2 of 8 Posts
Status
Not open for further replies.
Top