Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
461 Posts
Discussion Starter · #1 ·
imported post

hi removed the intake tubes on my 1100 gw and found very hard gummy coated

intake valves.

question can i squirt carb cleaner or some other medium into the open ports to clean the

valves? and then

of course change the oil to get rid of the crap??

thx gumby..
 

·
Premium Member
Joined
·
151 Posts
imported post

I would get some Berrymans fuel injector cleaner use the kind you pour from the can.The spray will also work but not as fast. Most times this stuff will make the valves look like new again. works better than seafoam on dirty carb jets!!
 

·
Premium Member
Joined
·
1,077 Posts
imported post

MONKEY WRENCH wrote:
I would get some Berrymans fuel injector cleaner use the kind you pour from the can.The spray will also work but not as fast. Most times this stuff will make the valves look like new again. works better than seafoam on dirty carb jets!!
How do you apply it? sprinkle some on, or put it in a spray bottle? Also where do you get this Berrymans stuff?
 

·
Premium Member
Joined
·
71 Posts
imported post

AutoZone and many other auto parts places carry Berrymans products. GOOD STUFF! The Berrymans carb cleaner is all I use. Gewt on the phone and call around first, eh.

Johnny
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top