Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Premium Member
Joined
·
2,614 Posts
Discussion Starter #1
imported post

OK, I put the seafoam in the oil and I've put about 75 miles on the bike today. After i drain the old oil, I'm going to put some cheap oil in with a new filter and run it for awhile before changing it again and putting in the good oil (at 6 bucks a quart I'm not gonna drain this out after a couple hundred miles.



What I want to know is how long do you guys run the bike with the seafoam in the crankcase before draining it?
 

·
Administrator
Joined
·
26,977 Posts
imported post

I would run it at least 100 miles of steady riding and drain it as soon as possible after stopping while the particles are still suspended in the oil.
 

·
Premium Member
Joined
·
392 Posts
imported post

DaveO430 wrote:
I would run it at least 100 miles of steady riding and drain it as soon as possible after stopping while the particles are still suspended in the oil.
THat is the advice I have seen as well.
 

·
Premium Member
Joined
·
342 Posts
imported post

I went about 180 very easy miles before draining...the new oil came out fairly black, so I did another filter/oil change 500 or so miles later.

(of course, 200 miles after that the clutch went boom & allowed me to change it again.)

Dave
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top