Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
10 Posts
Discussion Starter · #1 ·
imported post

I have lock my key and remote in my bike and have removed the seat to get at the 14 pin gray connector. However when I hook the probe to the battery + and touch the red wire, nothing happens. It is the same for the blue, green and light blue wires. Anybody have any suggestions. Do I need to have the battery at its highest level to do this.
 

·
Premium Member
Joined
·
10 Posts
Discussion Starter · #7 ·
imported post

I had to read a thread by Steve Saunders before my Truck opened. It was the yellow wire first to reset the lock.



The wiring layout in the connector will be different on some model years/regions but the wire colors relating to trunk locking/unlocking have the same functions. The blue wire you see near the top right of the connector block is the one you need to tip a power wire from the battery + to (on some models it's the red wire). The yellow wire resets/locks the trunk and in some situations you might need to tip your power wire to that yellow wire first, before theblue (or red) one will work for you.

by STEVE SAUNDERS



I WOULD LIKE TO THANK EVERYONE WHO CONTRIBUTED TO MY PROBLEM. IT IS NO LONGER A PROBLEM AS I AM NOW INSIDE OF MY TRUCK AND IN POSSESSION OF MY KEYS. THIS IS A TRULY GREAT SITE.



KOJAQ
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top