[Nightrider1]

imported post

Hello,
I am looking for an old Tape Deck for a 1983 GL1100 Aspencade. What brand does it take? If You got one for sale, Please PM Me
Thanks,
Nightrider1

 

[Nightrider1]

imported post

Mike,
All I have on 1t now is the Clarion1 am/fm Radio. The tape deck has a screw cover over it, and I haven't even taken that out yet. All the top has is a homemade plastic cover. They done a pretty good job on it too.
Thanks,
Nightrider1

 

[Nightrider1]

imported post

I will get a pic of it posted soon.
Thanks,
Nightrider1

 

[Nightrider1]

imported post

I believe it is a Clarion 2, I believe. I'm not sure. My cams down, so the pic will be forthcoming, and I took the 4 allen head screws off the left cover, and it has a plug in for a tape deck or something. What goes here?
Thanks,
Nightrider1

Addition: It looks Identical to the one below, but mine has a cover to the left with 4 allen head screws in it. Also, My Adj/Me button is missing on the botttom right, so I use a toothpick to set it. Works ok, but uses a lot of voltage under 2000rpms.
Nightrider1

 

[Nightrider1]

imported post

Bagmaster,
I was working with my mirrors better on my 83 Aspencade, and I did find the cb where you said it would be, so all I guess I need is the controller that goes on the handlebars. I really appreciate the information. It has all of the wiring connectors coming out of it also.
Thank You,
Sincerely
Nightrider1

P.S.
Been doing so much with the Aspencade, I've neglected to keep my little 80 GL1100 all polished. Theres just not enough time to do it all.

 

[Nightrider1]

imported post

Bagmaster Wrote:
If it's identical then you even have a cb in there somewhere too. The cb can be seen by looking in the fairing with the right turn signal removed. It's just forward of the radio tuner that's under the right side pocket.

The empty left side pocket sounds like it already has the mount and harness installed for the cassette player and you need the original Clarion cassette player to fit in there. Not worth the hassle, money or time to find one that actually works. You can get a cable that plugs into the distribution unit where the cassette plugs into it for a mp3 player instead. The RCA ones that Walmart sells has very good volume that works well for this.

You can remove that mount and harness and just put a left pocket in there, I have one for that side, I think, but no cover for it.

Mike,
I checked, and I do have the CB Module in there, with all of the wiring/connectors. All I need now is just the handle bar CB controls.
Thanks Bro!
Nightridder1