[Victour78]

imported post

Cross the County all the local places and I can't find the tap I need to run thru my Sparkplug holes Mostly the one with the few threads left from the broken Plug.. I came up with the 12 mm X 2.0 somehow I could be wrong because all I could find was 1.50 and 1.75 So someone please give me a hand up here.. Thanks.. There is a 14X2.0 but too big


ARE Head Gasket Really $45. Each OEM.. WHY????

 

[exavid]

imported post

You can get Honda OEM head gaskets for $38 from Honda Direct Line. I've installed aftermarket head gaskets on a 'Wing but mother Honda's own are probably worth the extra $15-20 for the set.The thread pitch is 1.25.

 

[Silicon Sam]

imported post

My pitch gauge from my tap and die set shows it to be a 1.25 pitch. Which would make this chaser the correct size.

http://www.autobarn.net/lisleplugchaser.html

 

[Kit Carson]

imported post

Napa auto parts, if they do not have it they can order it and have it the next day. I get a lot of things like taps from them.

Kit

 

[Big Cahuna]

imported post

Here's a few places to try,http://www.youtube.com/watch?v=84Jehn4ZsGY

 

[Victour78]

imported post

Thank you guys so much no one had the 1.25, that is what confused me.. and Thanks for all the Good Links.. I know the link from EXavid shows it to be 14 mm but my tap fell into a 14mm Die so I am sure that it is a 12 mm.. I don't think I will be able to make that Everywhere trip from Big Cahuna.lol

 

[exavid]

imported post

The 12mmare 1.25 as is the 14mm. The 1000 indeed uses 12mm plugs.