Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 1 of 1 Posts

·
Premium Member
Joined
·
689 Posts
generally, there a few places that oil can leak out of on that side of the bike, and are pretty common on the 1200.

there is a weep hole, under the bike, in the front cover casing, and means the oil seal has gone, around the oil pump. it means taking the front cover off, replacing all o rings, seals, and while you are there, the water pump.

also the oil seal behind the gear shifter, this is pretty easy to fix, just remove the shifter lever, pull the old seal out and replace.

and the gasket between the valve cover, and head, again an easy fix, remove the valve cover, and replace. OEM seals and gaskets are best.

good luck,
 
1 - 1 of 1 Posts
Status
Not open for further replies.
Top