Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
1,462 Posts
Vehicle Motor vehicle Car Automotive lighting Auto part
i put my compressor behind the right turn signal in the faring and ran the hose through the hot air outlet for the radiator on the right side. i made a bracket out of aluminum stock 1''x 1/16 about 8'' long
 

·
Premium Member
Joined
·
1,462 Posts
you can remove the right side pocket and put the compressor in front of the pocket close to the turn signal i used silicon to stick it to the inside of the fairing and tape to hold it in place til the silicon was dry
 

·
Premium Member
Joined
·
1,462 Posts
1 - 3 of 3 Posts
Status
Not open for further replies.
Top