Steve Saunders Goldwing Forums banner
Status
Not open for further replies.
1 - 2 of 2 Posts

·
Premium Member
Joined
·
21 Posts
imported post

Hello BlueNose,

I'm having a similar problems on my GL1200. The instrument panel segments come back if you (a) turn off your light (b) cycle the ightion key 0ff/on several times, (c) when the LCD guages light up then (d) press the starter button. Sounds bizzare, but it works. In my case I think there is a bad connection with the suspension system as my LCD flickers between air suspension reading and engine temp. Fuel guauge is now workable though.

Good luck,

Kenneth
 

·
Premium Member
Joined
·
21 Posts
imported post

Hello Mallers1,

Very interesting what you say about re-working the LCD unit. I might give that a go in the future.

Stay upright,

Kenneth
Leeds
 
1 - 2 of 2 Posts
Status
Not open for further replies.
Top