Steve Saunders Goldwing Forums banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
13 Posts
Discussion Starter · #1 ·
imported post

I have it apart. can I cut the two wires that go to it and splice them together will it run ?Is that the way to bypass it?
 

·
Goldwing Addict :-)
Joined
·
12,841 Posts
imported post

According to the 1800 service manual wiring diagram I have, yes, that will work. Are you sure it's the kill switch causing your problem? If you have the switch apart, can you temporarily jump across the switch with a test wire to make sure that's your problem?

John
 

Attachments

·
Administrator
Joined
·
26,995 Posts
imported post

They used to have two screw terminals on the kill switch, not sure about the 1800. I just took the wires loose and put both under one screw on one I had trouble with.
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top